Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 44

Display Setting
The brightness and backlight timeout settings can be confi gured, and the mode can be switched to
screen cleaning.
When changing the settings, take the following steps.
1.
Press the DISPLAY SETTING button on the MENU screen.
2
3
2. Select the Brightness using the
Brightness for the monitor backlight can be selected.
3.
Select the Backlight Timeout time using the
Time from the last operation on the touch panel until the monitor backlight turns off can be
selected.
4.
Select the Screen Image. (Factory default : BLACK)
You can select BLACK or WHITE of screen image.
5. Select the Security Lock. (Factory default : INVALID)
You can valid or invalid the Security Lock.
When the security lock is valid, the ID and password are required to return from the off
status of the backlight.
This enhances the security function.
6.
Select the "Backlight ON" with Alarm. (Factory default : VALID)
You can valid or invalid the "Backlight ON" with Alarm.
If you select "VALID", The backlight turns on when one or more units stop with alarm.
7.
Press the SET button.
Pressing the SET button applies the setting.
<When cleaning the screen>
8.
Press the CLEANING MODE button.
The mode is switched to screen cleaning.
[DISPLAY SETTING screen]
buttons. (Factory default : 7)
buttons. (Factory default : 10)
– 43 –
page 9
4
5
6
7
8