Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 18

■ The following method can also be used to set and change operations on each group.
<When making settings or changes in the GROUP LIST screen>
1.
Press the GROUP LIST button in the BLOCK LAYOUT screen.
2
3
2. Press the name of the group for which settings or changes are to be made.
The group name is reverse highlighted. To change the page, press the
3.
Press the CHANGE button.
The CHANGE GROUP screen is displayed. Make the settings or changes.
page 15
Note
• If the BACK button is pressed, it returns to the previous screen.
• RUN is indicated when at least one unit is running. Malfunctions are indicated when at least
one unit is not in good condition. STOP is indicated when all the units have stopped.
HOME LEAVE is indicated when at least one unit is set for home leave.
Operating mode, temperature setting, room temperature, fan speed and air direction show
the state of the representative unit.
• Groups that have the current day's schedule settings show
• icon is displayed when at least one unit needs cleaning fi lter.
• icon is displayed when at least one unit needs maintenance.
• icon is displayed when the group is the target for energy saving.
• icon is displayed when the group is the target for silent mode.
• The ones which are surrounded by red frames are the items which operations from the
remote controller are prohibited in the group settings.
• If the BLOCK LAYOUT button is pressed, the BLOCK LAYOUT screen is displayed.
page 14
[GROUP LIST screen]
– 17 –
page 14
or
.
button.