Publicidad
Idiomas disponibles
Idiomas disponibles
IF THE TIMER IS SET ON MORE THAN ONE ZONE
1. When you set timer for several cooking zones, red dots of the
relevant cooking zones are indicated. The timer display shows
the min. timer. The dot of the corresponding zone blinks.
2. Once the countdown timer expires, the corresponding zone will
switch off. Then it will show the new min. tier and the dot of
corresponding zone will flash.
NOTE: touch the heating zone selection control, the
corresponding timer will be shown in the timer indicator.
CANCELING THE TIMER
1. Touching the heating zone selection control that you want to cancel the
timer.
2. Touching the timer control, the indicator will flash.
3. Touch the '-' to set the timer to '00', the timer is canceled.
AUTO SHUTDOWN PROTECTION
Auto shutdown is a safety protection function for your induction hob. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in the table below:
Power level
Default working time (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 1 minute.
RESIDUAL HEATING WARMING
When the hob has been operating for some time, there will be some residual heat. The letter 'H'
appears to warm you to keep away from it.
1
2
3
8
8
8
57
4
5
6
4
4
4
7
8
9
2
2
2
Publicidad
