cecotec BOLERO DRESSCODE 7000 D Manual De Instrucciones página 83

1. Open the lower cover cap.
2. Remove the filter by turning it counterclockwise.
3. Be careful, empty the water with a suitable container.
4. Remove dust, dirt and other substances or objects.
5. Place the filter again in its original position by turning it in the other sense.
6. Open the lower cover cap.
Warning
- Make sure that the filter is reinstalled correctly.
- Rotate the lower cover cap (filter) so water runs directly into a suitable container.
- When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Do not remove the lower cover during the wash cycle, always wait until
the appliance has finished the cycle and is empty.
- When replacing the cover, ensure it is securely re-tightened.
6. TROUBLESHOOTING
Problem
The washing machine
does not turn on
The door does not open
Water leakage
Detergent residues in the
box
Cause
The door is not closed
properly. It is not connected
to a power outlet
The safety lock system is
activated
Bad connection between
pipes and water supply hose
or drainpipe.
Detergent is dampened or
agglomerated
Solution
Restart after the door is
closed.
Check if there are clothes
stuck.
Plug it to a mains socket.
Check that the control and
protection elements of the
electrical installation are
activated.
Unplug it and restart the
product.
Check and fasten the water
pipes and hoses correctly.
Clean the hoses ensuring
they are not blocked.
Clean and wipe the detergent
box
BOLERO DRESSCODE 7000 D - 7000 STEEL D
ENGLISH
83