Do not dispose of used devices with domestic waste. Dispose of them according to the
safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
-
-
-
Do not reach into the rotating feed rollers of the wire drive or into rotating drive compon-
ents.
The cover of the welding torch may only be opened while maintenance or repair work is
being carried out.
During operation
-
-
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current and risk of injury from the emerging wire electrode.
This can result in serious injury and damage to property.
▶
▶
▶
42
Cogs
Feed rollers
Wirespools and wire electrodes
Ensure that the cover is closed.
Keep the cover closed.
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.