Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L.
may initially be set for 5 minutes. If your
drinks have not cooled sufficiently after
this time, you may set a further 5 or 10
minutes cooling time. While this mode is
active, you must check the temperature of
the bottles regularly. When the bottles are
cool enough, they must be removed from
the appliance otherwise they may burst or
explode.
Important: If you are using the zone 1
and zone 2 compartments for cooling,
this mode will not activate.
3.3.2 Economy Mode (eco)
Economy mode ensures that your
refrigerator operates at the most efficient
temperature. To activate 'ECO' mode, press
the 'mode' button until the 'eco' symbol and
'e' illuminate.
3.3.3 Holiday Mode (H)
Holiday mode is represented by a symbol
of an umbrella and the sun. If the cooler
compartment will not be used for some
time, such as during a holiday, activate
holiday mode. To activate holiday mode,
press the mode button until the holiday
mode symbol and 'H' illuminate.
3.3.4 Quick-Freezing (SF, SUPER
FREEZE)
Press the 'zone1' or 'zone2' button until
'SF' shows on the electronic display. If no
button is pressed while 'SF' is displayed,
a beep will sound to confirm the mode is
active. This mode can be used to freeze
prepared meals or freeze large amounts
of food quickly. Quick-freezing mode will
automatically deactivate after 24 hours or
once the freezer compartment temperature
sensor reaches the correct temperature.
For quick-freezing, select the zone 1
compartment.
3.3.5 Quick-Cooling (SC, SUPER-COOL)
Press the cooler button until 'SC' shows
on the electronic display. If no button is
pressed while 'SC' is displayed, a beep
will sound to confirm the mode is active.
You can use this mode to cool prepared
meals or large amounts of food quickly.
Quick-cooling mode will automatically
deactivate after 4 to 6 hours, depending
on the ambient temperature, or when the
cooler compartment reaches a sufficiently
low temperature.
3.3.6 D oorLightsOn/Off(DOORLIGHT
ON/OFF)
Your appliance contains an illumination
system in the door handles.
To activate this illumination system, press
and hold the mode button for 3 seconds.
To deactivate the illumination system, press
and hold the mode button for 3 seconds
again.
3.3.7 Cooler (COOLER)
The cooler mode is used for setting the
temperature of the cooler compartment.
Press the cooler button to set the
temperature to 1,2, 3, 4, 5, 6, 7 or 8 °C.
3.3.8 Freezer / Cooler 1 (ZONE 1)
To use the zone 1 compartment as a
freezer, press the 'zone1' button to set the
temperature of the bottom-left compartment
to -14,-15,-16, -17, -18, -19, -20, -21, -22,
-23 or -24 °C.
To use the bottom-left compartment as a
cooler, press and hold the 'zone1' button
for 3 seconds. Then, set the temperature to
1,2, 3, 4, 5, 6, 7 or 8 °C.
3.3.9 Freezer / Cooler 2 (ZONE 2)
Press the 'zone2' button to set the
temperature for the bottom-right
compartment to -14,-15,-16, -17, -18, -19,
-20, -21, -22, -23 or -24 °C.
To use the bottom-right compartment as a
cooler, press and hold the 'zone2' button
for 3 seconds. Then, set the temperature to
1,2, 3, 4, 5, 6, 7 or 8 °C.
3.3.10 Child Lock (Key Symbol)
To activate the child lock, press and
hold the cooler and 'zone2' buttons
simultaneously for 3 seconds. The child
lock prevents changes from being made
to the settings as the buttons will be
deactivated. To deactivate the child lock,
press and hold the cooler and 'zone2'
112
FRIDGE - FREEZER
Publicidad
