Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L.
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer
and cooler indicators.
ERROR TYPE
and audible warning
or
If you are experiencing a problem with
your appliance, please check the following
before contacting the after-sales service.
Your appliance is not operating
Check if:
• There is power
• The plug is correctly placed in the socket
• The plug fuse or the mains fuse has
blown
• The socket is defective. To check this,
plug another working appliance into the
same socket.
MEANING
There is/are some
part(s) out of order or
"Failure" Warning
there is a failure in the
cooling process.
This warning especially
appears if there has
Freezer
been a power failure
compartment is not
for a long period or
cold enough
when the refrigerator is
operated for the first
time.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
Refrigerator
operated for the first
compartment is not
time. Ideal temperature
cold enough
for the refrigerator
compartment is +4
If you see this warning,
your foods are at risk of
spoiling.
Refrigerator
The food will start to
compartment too
freeze because the
cold
temperature is too cold.
This is seen when the
"Low voltage"
power supply becomes
Warning
lower than 170 V.
WHY
Call a service agent for assistance as
soon as possible.
1. Use food within a short time period.
Do not freeze foods that has thawed.
2. Set the freezer temperature to colder
values or set the Super Freeze until
the compartment gets to normal
temperature.
3. Do not put fresh food in the appliance
until the fault has cleared.
1. Set the refrigerator temperature
to colder values or set the Super
Cooling mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
C.
until the fault clears.
o
1. Check if the Super Cooling mode is
switched on.
2. Decrease the refrigerator
temperature values.
This not a failure. This prevents any
damage to the compressor. This
warning will clear after the voltage
reaches the required level.
The appliance performs poorly
Check if:
• The appliance is overloaded
• The appliance door is closed properly
• There is any dust on the condenser
• There is enough space near the rear and
side walls.
Your appliance is operating noisily
Normal noises
Cracking noise occurs:
• During automatic defrosting
122
FRIDGE - FREEZER
WHAT TO DO
Publicidad
