Genie GTH-2506 Manual Del Operador página 11

Segunda Edición - Primera Impresión
Calcomanías y Placas Aplicadas Sobre La Máquina
Ref. Calcomanía
9 TP4
TP5 TP3
NOTICE
10
QUICK GUIDE FOR THE USE
2506
STARTING THE MACHINE USING THE JOYSTICK
• Put the gear switch and the mechanical gear lever to • Boom lowering/lifting: shift the lever to
neutral. • Attachment frame forward/back pitching: shift the lever
• Engage the parking brake and ensure its light
indicator switches on. • Telescope retraction/extension: shift button
1 • Attachment coupling/release: press button
• To start the engine, rotate the ignition switch to poristion
0 the control lever to
and hold it in position.
1
2
The turn the switch to position
and start the engine.
2
11 • If the engine does not start within
20 seconds, release the key and
wait at least 2 minutes before
attempting again.
OVERLOAD WARNING SYSTEM (ARB)
During work, steadly check the display of the overload Do not use the machine and its attachments before
warning system. having read and understood the use and safety
The 8 LED indicator show: instructions of this manual.
Green LED 1-2-3-4 Machine stable. Not obeying the use and safety instructions can result in
Yellow LED 5-6 Machine unstable. The red LED flashes serious or lethal injury.
and buzzer sounds intermittently. The instructions are delivered with the machine;
Red LED 7-8 Hazardous overload. Risk of additional copies may be obtained from your dealer or
overturning. The red LED is constantly
directly from Terexlift.
lit and the buzzer sounds continuously. The operator is responsible for obeying the aforesaid
Retract the load within safety limits. instructions.
Do not raise boom on unstable or sloping ground. Never
exceed maximum permitted loads (see load charts).
Lifting manoeuvres with the machine in operation are
forbidden.
Before leaving the control place:
- lower any suspended load to the ground
- set the controls of the boom to neutral position
- set the speed lever to neutral position, engage the
parking brake and stop the engine.
12
13
14
15
16
17
Código 57.0009.0440
Código
TP2 TP1 09.4618.0786 Etiqueta - Puntos de prueba
09.4618.0786
09.4618.0776
09.4618.0776
Optional
3
4
to
to
and shift
09.4618.0842 Etiqueta - Guía Rápida y Palancas de
WARNING
09.4618.0794
09.4618.0921
09.4618.0921
09.4618.0792 Etiqueta - Cierre el capó motor
09.4618.0792
09.4618.0922 Riesgo de aplastamiento
09.4618.0922
09.4618.0240
09.0803.0424
09.4618.0242
GTH-2506 - AGRI-625
Descripción
Etiqueta - Sistema de desbloqueo parte
superior puerta
mando máquina GTH-2506
Etiqueta - Límites de uso en las cercanías
de lìneas eléctricas aéreas
Adhesivo decorativo - Logo GENIE con
fondo BLANCO
Manual del Operador
Cdad
1
1
1
1
1
6
1
1
1
11