Playback Modes; Setting The Playback Mode; Searching Backward And Forward - Tascam CD-400U Manual Del Usuario

Playback modes

This unit has three playback modes.
The current playback mode is shown on the Home Screen.
Continuous playback mode (default setting)
Tracks in the playback area will be played in track number order.
NOTE
When using an SD card or USB flash drive and the play area
is folder ( icon shown), tracks in the currently playing folder
will be played in numerical order.
Single playback mode
The selected track will be played and stop after playback.
Random playback mode
All tracks in the playback area will be played in random order
regardless of track number.
NOTE
When using an SD card or USB flash drive and the play area
is folder ( icon shown), tracks in the current folder will be
played in random order. (see "Folder playback (SD cards and
USB flash drives only)" on page 25)

Setting the playback mode

When shift mode is active (SHIFT indicator lit), press the main
unit 3 [P.MODE] button or the remote control P.MODE button
to change the playback mode.
Each time you press this button, the playback mode will change.
Indicator Playback mode
Not shown Continuous playback mode
Single playback mode
1
Random playback mode
RND
CD 1
Single playback mode active
CD RND
Random playback mode active
NOTE
i Unless otherwise specified, explanations in this manual as-
sume that the playback mode is set to continuous playback
mode.
i The current playback mode appears on the Home Screen.
PLAY
01 00:01
PLAY
01 00:01
4 – CD/SD/USB playback

Searching backward and forward

You can search backward and forward within a track while listen-
ing to it.
1.
Play or pause the desired track.
2.
Press and hold the main unit m / , [FAST] buttons or
the remote control m / , buttons to start searching
backward/forward.
3.
To stop searching, release the button you are pressing.
The state (playing or paused) before searching started will
resume.
NOTE
i If the end of a track is reached when searching forward, the
unit skips to the next track and starts searching it from the
beginning.
i If the end of the last track is reached when searching forward,
the unit stops.
i If the beginning of a track is reached when searching back-
ward, the unit skips to the track before it and starts searching
it from the end.
i If the beginning of the first track is reached when searching
backward, playback pauses, but will resume when the button
is released.
i When searching backward/forward by pressing the m / ,
button, press and hold the other m / , button for the op-
posite direction to search at high speed. (This function only
works with the main unit buttons.)
27
TASCAM CD-400U