Using The Repeat Playback Function; Ordinary Repeat Playback Settings; A-B Repeat Playback Settings (Audio Cds Only) - Tascam CD-400U Manual Del Usuario

4 – CD/SD/USB playback

Using the repeat playback function

All tracks in the playback area can be played back repeatedly.
Specified intervals within a track can also be played back (A-B
repeat playback).

Ordinary repeat playback settings

When the repeat playback function is on, operation depends on
the playback mode setting.
Playback mode setting Function
Continuous playback Repeat playback of the tracks in the
mode set play area
Single playback mode Repeat playback of the current track
To turn the repeat playback function on/off, activate the shift
mode (SHIFT indicator lit) and press the main unit 4 [REPEAT]
button or remote control REPEAT button.
REP appears on the Home Screen when the repeat function is
on.
REP
CD
Continuous playback mode active
CD 1REP
Single playback mode active
NOTE
i The repeat playback setting is retained even when the unit is
turned off.
i The repeat playback function cannot be turned on when the
random playback mode is active (RND shown on display).
28
TASCAM CD-400U
PLAY
01 00:01
PLAY
01 00:01
A-B repeat playback settings (audio CDs
only)
Specified intervals within a track can be played back (A-B repeat
playback). Follow the procedures below to use A-B repeat play-
back.
1.
Select CD as the current source. (see "Selecting the playback
source" on page 22)
2.
When playing back or when playback is paused at the point
where you want to the repeat playback interval to start (A),
press the main unit 5 [A-B REP] button when the shift mode
is activated (SHIFT indicator lit) or press the remote control
A-B REP button.
A- appears on the Home Screen.
CD A-
3.
At the point where you want the repeat playback interval
to stop (B), press the main unit 5 [A-B REP] button when
the shift mode is activated (SHIFT indicator lit) or press the
remote control A-B REP button.
A-B appears on the Home Screen.
This confirms the set interval (A-B) and starts A-B repeat
playback.
CD A-B
CAUTION
A-B repeat is not possible with data CDs, SD cards or USB
flash drives.
NOTE
i Press the main unit STOP button or remote control 8 button
to stop the unit and clear the set A-B repeat interval. Chang-
ing the track or the current source will also clear the repeat
interval.
i The A-B repeat playback interval cannot include more than
one track.
i The A-B repeat setting is not retained when the unit is turned
off.
PLAY
01 00:10
PLAY
01 00:22