Operation - cecotec ProClean 2010 Manual De Instrucciones

ENGLISH
4. Make sure the appliance is switched off before connecting it to a wall outlet.
5. The microwave door must be closed in order to operate.
6. The product must be placed in such way that the plug is accessible, and must ensure a
good grounding in case of leakage in order to avoid electric shocks.
7. In case there is any manufacturing rests in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
8. Check the device for any damage, such as misaligned or bent door, damaged door seals
and sealing surface, broken or loose door hinges and latches and dents inside the cavity or
on the door. If there is any damage, do not operate it and contact immediately the official
Technical Support Service of Cecotec.

4. OPERATION

Control panel
The microwave panel includes 2 knobs:
Power knob
Select between 6 different power levels according to the type of food. The different levels,
from left to right, are:
1. Connect the product to the power supply. (Before connecting it, make sure the timer is set to the off
position).
2. Place the food you want to cook or heat inside the microwave and close the door.
3. Turn the power knob to select the desired power level.
16 PROCLEAN 2010
1. Low: 20 % power output
2. Defrost: 42 % power output
3. Medium low: 52 % power output
4. Medium: 73 % power output
5. Medium high: 88 % power output
6. High: 100 % power output
Timer knob
The cooking time can be set from 1 to 30 minutes. Turn the knob clockwise to
increase operation time. The knob can be adjusted at any point to increase or
decrease operation time, or to stop the microwave.
Using the microwave