Bosch BCH6 Serie Instrucciones De Uso página 35

•
Power level 2
Vacuuming at normal power and with the electric
brush switched on.
For normal cleaning tasks on all loors at an average
run time.
•
Turbo level
Vacuuming at full power and with the electric brush
switched on.
For particularly demanding cleaning tasks on all sur-
faces (carpets, in particular) and when using an op-
tional accessory. The appliance achieves a shorter
run time at this level.
7
Fig.
•
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this, tilt
the vacuum cleaner forwards slightly in the direction
of the nozzle.
!
Caution: When the appliance is left standing, it must
be switched off, because if the brush is turning while
the appliance is standing still, it could cause damage
to the loor covering.
Vacuuming with accessories
8*
Fig.
a) Plug the accessory adapter into the hand vacuum clea-
ner and lock into place.
To release the accessory adapter, press the release
button and pull out the accessory adapter.
b) Fasten the carrying strap to the handle. When doing so,
lay down the appliance; do not rest it on the adapter
or the hose.
9*
Fig.
Fit nozzles as required to the lexible hose with the ac-
cessory adapter handle:
•
Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
•
Crevice nozzle for vacuuming crevices and corners,
etc.
After using the appliance
10
Fig.
•
Switch off the appliance after vacuuming.
Emptying the dust container
11
Fig.
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every
use or, at the latest, when dust at one point in the dust
container has reached the marking.
We recommend that you not ill the dust container bey-
ond the marking, as this leads to considerable soiling
of the ilter.
When emptying the dust container, always check how
34
2 dirty the outer ilter unit is and, if necessary, clean it as
detailed in the "Cleaning the outer ilter unit" instruc-
tions.
Fig.
!
Caution: The ilter can only be cleaned if the appli-
ance is switched off.
Never vacuum without the outer ilter unit and its
Turbo
itted ilter cartridge.
12
Fig.
•
Using the release button, unlock the dust container
and remove it from the appliance.
13
Fig.
•
Take the ilter unit out of the dust container.
•
Empty the dust container.
14
Fig.
•
Remove any dirt which may have been lodged under-
neath the container ejector opening.
•
Insert the ilter unit into the dust container, making
sure it is correctly seated.
•
Insert the dust container in the appliance, so that it
'clicks' audibly into place.
!
Caution: If you notice any resistance when inserting
the dust container, check that the ilter is complete
and that the ilter unit and dust container are correct-
ly seated.
Filter care
!
Caution: The ilter can only be cleaned if the appli-
ance is switched off.
Your appliance is equipped with a "Sensor Control"
function.
This function constantly monitors whether your vacu-
um cleaner is working at its optimum power level. The
indicator light lets you know when you need to clean
the ilter cartridge, so that the appliance can reach its
optimum power level once more.
15
Fig. Sensor Control
The indicator lights up blue or is off when the appli-
ance is working at its optimum level. Once the indica-
tor turns red and lashes, the outer ilter unit and ilter
cartridge must be cleaned.
The appliance is automatically adjusted to power level
1.
* Depending on model
16