EnglisH
12
environment. Always remove the battery before
you discard and hand in the appliance at an official
collection point. Dispose of the battery at an official
collection point for batteries. If you have trouble
removing the battery, you can also take the appliance
to a Philips service centre. The staff of this centre will
remove the battery for you and will dispose of it in
an environmentally safe way.
Only remove the battery if it is completely empty.
1
Remove the powerplug from the wall socket
and pull the appliance plug out of the shaver.
2
Let the shaver run until it stops, undo the two
screws in the hair chamber and remove it.
3
Undo the two screws at the back of the shaver
and remove the back panel of the housing.
4
Remove the side panels by pulling them off the
sealed power unit.
5
Undo the three screws in the sealed power
unit.