Publicidad
Idiomas disponibles
Idiomas disponibles
This manual is designed to make it as easy as possible for you to assemble,
Tools Needed for Assembly
ne hillips head screwdriver
One stepladder
Four wire connectors
!
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 10). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any
accessories designated specifically for use with this
product by Fanimation. Substitution of parts or
accessories not designated for use with this product
by Fanimation could result in personal injury or
property damage.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to
exploded view illustration.
Hanger Bracket
Assembly
Downrod/
Hanger Ball Assembly
Canopy Screw
Cover Assembly
install, operate and maintain your ceiling fan
One wire stripper
One
screwdriver
WARNING
Unpacking Instructions
Motor Coupling
Cover Assembly
Ceiling Cnopy
Light Plate/LED
Assembly
iring outlet o and o connectors
re uired y the local code
lade
conductor
nstalled
p to
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Light Kit/Glass
Assembly
4
Materials
he
ini u
wire with ground of the following si e:
ire ength
ire i e
ft
ft
– Wire Connectors
Receiver
Hand-held
Unit
Remote
Motor Assembly
ust e of type
wire would e a
Hardware Bags
Publicidad
