Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING THE FUEL
FILTER.
Remove and replace the in-
line fuel filter (fig. 13).
Change it from time to time.
CLEANING THE WATER
FILTER
Clean the water intake filter
regularly and free it from any
impurities (fig. 14).
CHANGING THE NOZZLE
The high pressure nozzle fitted on the lance must be chan-
ged from time to time, as this component is subject to
normal wear during use. Wear may generally be detected
by a drop in the working pressure of the cleaner. To replace
it, consult your supplier and/or dealer for instructions.
DESCALING
Descaling must be carried out from time to time because the
scale present in the water partially deposits inside the hydraulic
circuit and the coil which with time becomes clogged.
Apply to our technical service centre to have the machine
descaled from time to time; this will save you money and
increase the efficiency of the cleaner.
English
TABLE OF ROUTINE MAINTENANCE TO BE PER-
FORMED BY THE USER.
Description of operations:
Check power cable - pipes - high pressure
connectors.
Change and clean fuel filters.
Clean fuel tank.
Clean water filter.
TABLE OF
FIG.13
BE PERFORMED BY THE TECHNICAL SERVICE
CENTRE.
Description of operations:
Boiler:
Clean Coil.
Descale coil.
Oil change in H.P. pump.
Clean fuel pump.
Change fuel nozzle.
Regulade electrodes.
Change electrodes.
FIG.14
Change seals on H.P. pump.
Change lanze nozzle.
Calibrate and check the safety
devices.
- 24 -
Each use
Every 100 hours
Every 100 hours
Every 50 hours
EXTRAORDINARY MAINTENANCE
Every 200 hours
Every 300 hours
Every 500 hours
Every 200 hours
Every 200 hours
Every 200 hours
Every 500 hours
Every 500 hours
Every 200 hours
Once a year
TO
Publicidad
