Install the Camera with Loop Strap
You are allowed to strap the camera to a tree with both the camera barcket & mount base.
Thread the provided strap to the plate and fasten it to a tree. Next, attach the camera to the
plate and you are good to go.
15
English
Safety Instructions of Battery Usage
(For Battery-Powered Cameras)
The camera is not designed for running 24/7 at full capacity or around-the-clock live streaming.
It's designed to record motion events and to live view remotely only when you need it. Learn useful
tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893
1. If the battery is built-in, do not remove it from the camera.
2. Charge the rechargeable battery with a standard and high-quality DC 5V battery charger or
Reolink solar panel. Do not charge the battery with solar panels from any other brands.
3. Charge the battery when temperatures are between 0°C and 45°C and always use the battery
when temperatures are between -10°C and 55°C.
4. Keep the charging port dry, clean and free of any debris and cover the USB charging port with
the rubber plug when the battery is fully charged.
5. Do not charge, use or store the battery near any ignition sources, such as fire or heaters.
6. Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, turn off the power
switch or remove the charger immediately, and stop using it.
7. Always follow the local waste and recycle laws when you get rid of the used battery.
English
16