Klauke MAP 1 Manual De Instrucciones página 21

Instruction Manual
for the electro-hydraulic pressing tool Type MAP 1
Serial-No. .
Index
1. Introduction
2. Labels
3. Warranty
4. Description of the electro-hydraulic crimping tool
4.1 Description of the components
4.2 Brief description of the important features of the unit
4.3 The light diode display
5. Remarks in respect of the determined use
5.1. Operation of the tools
5.2. Explanation of the application range
5.3. Mounting instructions
5.4. Service and Maintenance instructions
5.5. Remarks on the use of the Battery Cartridge and Charger
5.6 Storage and transport of the crimping tool.
6. Troubleshooting
7. Putting out of action/waste disposal
8. Technical data