Klauke MAP 1 Manual De Instrucciones página 24

Instruction Manual MAP 1
_______________________________________________________________________________________________________________________
4. Description of the battery operated electro-hydraulic pressing tool
5. Description of the components
The hydraulic tool type MAP 1 is a hand held tool and consists of the following components:
Table 1 (see picture 2)
Pos.-No. Description
1 Trigger
2 Retract slide
3 Pressing head Working unit to accommodate the pressing dies P 31
4 Locking pin
5 Battery
6 battery lock
7 Jaws
8 Lock
9 LED
Function
Actuator to start the crimping cycle
Bar to open the crimping dies in case of an
error or emergency
Pin with special lock to open/close the pressing
head
rechargeable NiCd battery 9.6V
Slide to unlock the battery
interchangeable pressing jaws with multiple
pressing geometries
to hold the interchangeable dies in place
Battery charge control and indication of Service
Intervals
page 24
Reference
pp 25, 26,
27
P 27
P 26
pp 27, 32-
33, 35
P 32
pp 25, 26,
28-29, 31,
34
P 3
P 26