Klauke MAP 1 Manual De Instrucciones página 33

Instruction Manual MAP 1
_______________________________________________________________________________________________________________________
As soon as the speed of the machine decreases noticeably the battery must be recharged. Do not
recharge a partially discharged battery as a precaution.
Charge the battery at room temperature between 10°C and 40°C. If charging a battery which
has currently been used or which was laying in the sun for a longer period of time (T>65°C) the
right LED might flash red. In this case remove battery out of charger and wait for a while. The
charging procedure can be re-started after the battery cooled down. Charging batteries at low
temperatures under 5°C is not possible. Increase battery temperature before starting the
charging cycle. Do not expose the charging unit to rain and snow. Do not charge a battery in
the vicinity of explosive materials and gases.
No other batteries e.g. dry batteries or car batteries etc. are permitted to be used neither in the
tool nor in the charging unit. The charging unit also allows to charge the batteries RA1, RA2
and RA3.
Do not use the cord to transport the charging unit or to pull the plug out of a wall socket with
force. Do not insert strange parts into the ducts of the charging unit. Pull the plug of the
charging unit after charging. Do not disassemble the charging unit or battery.
The charging of the batteries must only be made with generic chargers. The mini battery can be
charged with all chargers.
Attention
Do not place the battery in your pocket or in your toolbox if there are any
conductive materials in it such as coins, keys, tools or other metallic parts.
page 33