Wahl 1871 Li Manual De Instrucciones página 10

E N G L I S H
Emission sound pressure level:
Vibration:
Charging stand
Dimensions
with accessories (LxWxH):
Weight:
Plug-in transformer
de
Manufacturer:
en
fr
Type
it
Input voltage:
es Input AC frequency:
Output voltage:
pt
Output current:
Output power:
nl
Average active efficiency:
No-load power consumption:
da
Type
sv
no
Input voltage:
Input AC frequency:
fi
Output voltage:
Output current:
tr
Output power:
Average active efficiency:
pl
No-load power consumption:
cs
Manufacturer:
sk
hr
Type
hu
sl Input voltage:
Input AC frequency:
ro
Output voltage:
Output current:
bg
Output power:
Average active efficiency:
ru
No-load power consumption:
uk
Operating conditions
et
Ambient temperature:
lv
The appliance is safety insulated and radio screened. It meets the require-
ments of EU Electromagnetic Compatibility Directive 2014/30/EC and
lt
Machinery Directive 2006/42/EC.
el
ar
10
max. 63 dB(A) @ 25 cm
< 2.5 m/s
2
96 x 120 x 72mm
approx. 91 g
Ten Pao Industrial Co., Ltd.
Room 10-11,6/F., Kwong Sang Hong
Centre, 151-153 Hoi Bun Road, Kwun
Tong, Kowloon, Hong Kong
Adapter 6000
Euro plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.3 %
0.04 W
Adapter 6000
UK plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.1 %
0.04 W
GOLD MARK (CHINA) HOLDINGS LTD
Unit 1706,17/F.,Vanta Industrial
Centre, 21-33 Tai Lin Pai Road, Kwai
Chung, N.T., Hong Kong
Adapter 6000 A (VI)
Euro/UK plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.7 %
0.04 W
0°C – +40°C
Operation
Preparation
Keep the packaging material for safe storage or transport later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Please note that we perform quality tests on all of our products.
Therefore, you may find small synthetic hair on the blade set or
on the machine. However, we assure you that your clipper and
cutting blade / blade set are unused.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage stated on the
nameplate.
Charging the battery
1. Connect the appliance plug of the plug-in transformer to the charging
stand socket (Fig. 4ⓐ).
·
The appliance can also be connected directly to the plug-in
transformer for charging (Fig. 2ⓐ/ⓑ).
·
An intelligent battery management system prevents
overcharging.
2. Connect the plug-in transformer to the mains socket (Fig. 4ⓑ).
3. Switch off the appliance using the on/off switch (Fig. 3ⓑ).
4. Place appliance in the charging stand (Fig. 4) or connect directly to
the plug-in transformer (Fig. 2 ⓐ/ⓑ). A signal will sound and the
charging process begins.
·
According to the charge status, the corresponding segment
of the battery power indicator blinks during the charging
process. Once the battery is fully charged, all segments of
the battery power indicator will remain lit continuously.
·
After the appliance has been removed from the charging
stand, the display goes out after approx. 30 seconds. (power
saving mode).
5. Once the battery is fully charged, a signal will sound.
Battery operation
1. Switch on the appliance using the on/off switch, and switch off after
use (Fig. 3ⓐ/ⓑ).
·
After the appliance has been switched off, the display goes
out about 30 seconds later (power saving mode).
·
The charge status of the battery is displayed by the battery
power indicator.
·
When the battery has fully run down, the appliance switches
itself off automatically.