Bombard TYPHOON 285 Manual Del Propietário página 29

THE HIGH PRESSURE PUMP (TYPHOON AERO ONLY)
THE STANDARD FOOT PUMP
a. connecting tip
b. hose end piece
c. hose base
d. outlet for inflation
THE STANDARD VALVES
(1) cap (2) valve insert
To activate the standard valves into INFLATION
position:
• Free the valve insert from its protection.
• Unscrew the valve cap.
• Screw the valve support onto its base (screw it
tight but without
deteriorate the screw thread) and check that
the valve cap stays accessible.
TO DEFLATE:
Unscrew the valve support from its base
INFLATION SYSTEM
(3) base
exaggeration, not to
Position A
The pump has maximum flow but low
pressure: this position is used to give
shape rapidly to all inflatable parts of
the boat.
Position B
The flow is inferior to position A but
provides pressure that is superior, with
the same effort.
Position C
To deflate, insert the tube as indicated
in figure C and pump normally.
a
1
2
3
7 / 10
b
c
d
E
N
G
L
I
S
H