Publicidad
Idiomas disponibles
Idiomas disponibles
English
● For intermittent operation, Set the nailing
operation switch to FULL SEQUENTIAL
ACTUATION MECHANISM (Nailing operation
indicator is light in blue.) (i.e. Set to SINGLE
ACTUATION MECHANISM.)
● To avoid double fi ring or accidental fi ring due
to recoil.
1) Set to FULL SEQUENTIAL ACTUATION
MECHANISM.
2) Pull the trigger rapidly and fi rmly.
Set the nailing operation switch to FULL
SEQUENTIAL
(Nailing operation indicator is light in blue.)
Position the nail outlet on the workpiece with
fi nger off the trigger.
Depress the push lever fi rmly until it is completely
depressed.
Pull the trigger to drive a nail.
Remove fi nger from the trigger and lift the tool off
the wood surface completely.
To continue nailing in a separate location, move the
nailer along the wood, repeating steps
required.
NOTE
Operations
and
2 seconds of each other. If more than 2 seconds
pass after
, the Nailer will not work properly. If this
happens, retry from
Nailing operation
indicator (Light in blue)
Push lever
24
WARNING
ACTUATION
MECHANISM
–
should be done within
.
Nailing
operation
switch
Trigger
(2) Continuous operation (Push lever fi re)
Using CONTACT ACTUATION MECHANISM
● To avoid double fi ring or accidental fi ring due
to recoil.
1) Do not press the nailer against the wood
with excessive force.
2) Separate the nailer from the wood as it
recoils after nailing.
Set the nailing operation switch to CONTACT
ACTUATION
indicator is blink in blue.)
Pull the trigger with the Nailer off the workpiece.
Depress the push lever against the workpiece to drive
a nail.
Move the Nailer along the workpiece with a bouncing
motion.
Each depression of the push lever will drive a nail.
As soon as the desired number of nails have been driven,
remove fi nger from the trigger.
NOTE
as
Operations
2 seconds of each other. If more than 2 seconds
pass after
, the Nailer will not work properly. If this
happens, retry from
Nailing operation
indicator (blink in blue)
Previously pull the trigger
WARNING
MECHANISM
(Nailing
and
should be done within
.
Nailing operation
switch
operation
Publicidad
