Publicidad
Idiomas disponibles
Idiomas disponibles
English
(2) Remove the hook and hook plate.
(3) Install the hook on the other side and securely
fasten with screw.
NOTE
Hook can be used as a hanger.
USING THE NOSE CAP
● When attaching or detaching the nose cap,
be sure to remove your fi nger from the trigger
and remove all remaining fasteners and the
battery from the nailer.
If you like to protect the surface of workpiece against
scratches or markings made by the push lever, attach the
accessory nose cap to the push lever.
Remove all remaining fasteners and battery from
nailer.
Put the nose cap to the toe of the push lever.
The nose cap is marked to indicate the exit point of
the nail, making alignment easier.
When not using the nose cap, secure in the storage
compartment located on the reverse side of the
magazine.
26
WARNING
Nose Cap
Magazine
Nose Cap
NT1865DMA(S)
NOTE
● The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
CLEARING A JAM
If nails are jammed in fi ring head, remove it, and adjust the
nailing in the following order.
CAUTION
● Remove the battery from the Nailer.
Remove the battery from the Nailer.
Remove all nails.
Release the Lock lever and open guide plate.
Lock lever
Guide Plate
Push Lever
Nose Cap
Magazine
NT1865DM(S)
Publicidad
