Jole i-Trillo FX Manual De Instrucciones página 6

Height Adjustment
see image
8
Squeeze the head support
adjustment lever while pulling
up or down on the head
support until it snaps into one
of the 10 positions.
8
Concerns on Installation
see images -
9 11
9
1
11
9
– for Head Support
8
10
2
Installation using ISOFIX System and
3-point belt or using 3-point belt only
see images -
12 25
If vehicle is equipped with ISOFIX,
the vehicle lower anchor points
may be visible at the vehicle seat
crease. See your vehicle owner's
manual for exact locations,
anchor identification, and
requirements for use.
1. Fit the ISOFIX guides with the
ISOFIX anchor points.
12
ISOFIX guides can protect the
surface of the vehicle seat from
being torn. They can also guide
the ISOFIX connectors.
2. Press the ISOFIX adjusting
button to pull out the ISOFIX
connectors.
13
Rotate the ISOFIX connectors 180
degrees until they are pointing in
the direction of the ISOFIX guides.
14
12
13
The
14
1
1
2
2
10