1 - DESCRIPTION OF THE APPLIANCE AND OF THE COMMANDS
1. Appliance body
2. Air outlet grid
3. Air outlet flap
4. Display
5. Air inlet grid
7
6
11
2 - INSTALLATION
• After removing the packaging, make sure of the appliance integrity; in case of doubts,
do not use it and please refer to professionally qualified personnel.
• The appliance must be installed on a masonry or made of heat resistant material wall
(not wooden or made of easily overheatable synthetic material).
The appliance must be installed:
• in such a way as to prevent the ON/OFF switch and the buttons from
being touched by who is standing in the bathtub or in the shower.
• At a distance of at least 300 mm from walls
• At a distance of at least 1000 mm from flammable materials (cur-
tains, textiles etc.)
EN - 8
6. (0 / I) ON/OFF switch
7. Power cord
8. Use and maintenance
booklet
9. Remote control
1
9
5
4
1
10. Wall plugs and screws
for the appliance wall
fixing (3)
11. Manual operating
START/STOP button
3
2
10
8