Olimpia splendid CALDO UP T WIFI Instrucciones Para El Uso Y El Mantenimiento página 32

• Remove the battery disconnection pull tab from the
remote control so that it is operational.
3.3.a - Insertion of batteries
The batteries are supplied with the machine.
To insert the batteries correctly:
a. Press the lateral pull tab and extract the battery support from the remote control
body.
b. Place the battery in the support with symbol "+" facing upwards.
c. Correctly insert the battery support in the specific slot by pushing it all the way in.
Check the polarity indicated on the bottom of the compartment.
3.3.b - Replacement of batteries
Replace the batteries when you no longer hear a beep from the appliance when
pressing any key on the remote control.
Always use new batteries. The use of old or different batteries could generate
malfunctioning of the remote control.
The remote controller uses a 3,0V lithium battery (type CR 2025).
When replacing batteries, replace both and dispose of the dead bat-
teries in the appropriate collection centres and as required by law.
• If the remote control is not used for several weeks or longer, remove the bat-
teries. Any leaks from the batteries could damage the remote control.
Do not re-charge or disassemble the batteries. Do not throw the bat-
teries into the fire. They can burn and explode.
3.3.c - Location of the remote control
Keep the remote control in a position from which the signal can reach the receiver of
the appliance (maximum distance is approx. 8 metres - with charged batteries). The
presence of obstacles (furniture, curtains, walls, etc.) between the remote control and
the appliance reduces the remote control range.
EN - 12