Publicidad
Idiomas disponibles
Idiomas disponibles
EN
EN
The manufacturer is not liable for damages
The manufacturer is not liable for damages
resulting from:
resulting from:
• incorrect use and / or improper use of the
• incorrect use and / or improper use of the
machine;
machine;
• repairs performed by unauthorized Service
• repairs performed by unauthorized Service
Centers;
Centers;
• tampering with the power cord;
• tampering with the power cord;
• tampering with any part of the machine;
• tampering with any part of the machine;
• use of non-genuine spare parts and
• use of non-genuine spare parts and
accessories;
accessories;
• no water softening;
• no water softening;
• storage at a room temperature of less than
• storage at a room temperature of less than
39.2°F (4°C);
39.2°F (4°C);
• using the machine at a temperature of less
• using the machine at a temperature of less
than 41°F (5°C);
than 41°F (5°C);
• using the machine at a temperature of
• using the machine at a temperature of
more than 104°F (40°C);
more than 104°F (40°C);
• using non-compatible capsules.
• using non-compatible capsules.
In any of the above cases, the warranty will be
In any of the above cases, the warranty will be
null and void.
null and void.
STARTING THE MACHINE
STARTING THE MACHINE
Set the machine on a flat and firm surface,
Set the machine on a flat and firm surface,
far away from water or heat sources.
far away from water or heat sources.
Do not connect the machine to the mains
Do not connect the machine to the mains
supply. Any damage caused by the failure to
supply. Any damage caused by the failure to
follow these instructions will make the war-
follow these instructions will make the war-
ranty null and void.
ranty null and void.
Rinse the tank before use. Fill the water tank
Rinse the tank before use. Fill the water tank
only with fresh, non-carbonated drinking water.
only with fresh, non-carbonated drinking water.
The cover can be lifted to fill the tank directly.
The cover can be lifted to fill the tank directly.
The water level should never exceed the
The water level should never exceed the
MAX reference mark and shall always be
MAX reference mark and shall always be
above the MIN mark.
above the MIN mark.
8
8
PREPARING THE MACHINE
PREPARING THE MACHINE
Use non-carbonated fresh water only. Hot
Use non-carbonated fresh water only. Hot
water and other fluids can damage the tank.
water and other fluids can damage the tank.
Make sure that your hands, the machine, the
Make sure that your hands, the machine, the
cord and the machine supporting surface are
cord and the machine supporting surface are
not wet.
not wet.
Insert the plug into the socket.
Insert the plug into the socket.
Press one of the switch-on/supply buttons to
Press one of the switch-on/supply buttons to
switch the machine on.
switch the machine on.
The machine will be ready for use when the an-
The machine will be ready for use when the an-
imation is over and the supply buttons light up
imation is over and the supply buttons light up
to a steady white light.
to a steady white light.
Remove the mi milk
Remove the milk frothing jug from the ma-
lk
f fro roth thin ing
chine.
chine.
When the milk frothing jug is not inserted, the
When the milk frothing jug is not inserted, the
coffee dispensing icons will turn on only.
coffee dispensing icons will turn on only.
The milk dispensing icons will be disabled.
The milk dispensing icons will be disabled.
g
ju jug
g
from the ma-
Publicidad
