Publicidad
Idiomas disponibles
Idiomas disponibles
ENERGY SAVING
ENERGY SAVING
The machine will switch to the power-saving
The machine will switch to the power-saving
mode after about 4 hours of being idle, and the
mode after about 4 hours of being idle, and the
on/stand-by
on/stand-by
light will go out.
light will go out.
The machine can be manually switched to the
The machine can be manually switched to the
stand-mode by before the 4 hours' default time,
stand-mode by before the 4 hours' default time,
by means the ON/stand-by
by means the ON/stand-by
ACOUSTIC SIGNAL
ACOUSTIC SIGNAL
ACTIVATION / DEACTIVATION
ACTIVATION / DEACTIVATION
Set the machine to the stand-by mode.
Set the machine to the stand-by mode.
Simultaneously keep ESPRESSO
Simultaneously keep ESPRESSO
MACCHIATO
MACCHIATO
buttons depressed over at
buttons depressed over at
least 2 seconds.
least 2 seconds.
•
•
The machine will emit one brief acoustic
The machine will emit one brief acoustic
signal to notify the deactivation.
signal to notify the deactivation.
•
•
The machine will emit two brief acoustic
The machine will emit two brief acoustic
signals to notify the activation.
signals to notify the activation.
Once the procedure has been completed, the
Once the procedure has been completed, the
machine will go back to the stand-by mode.
machine will go back to the stand-by mode.
MACHINE SETTING
MACHINE SETTING
button.
button.
and
and
COFFEE DOSE PROGRAMMING
COFFEE DOSE PROGRAMMING
The double shot and coffee doses cannot be
The double shot and coffee doses cannot be
programmed with the milk-based beverages.
programmed with the milk-based beverages.
Press the On/Stand-by
Press the On/Stand-by
machine on. The machine will be ready when the
machine on. The machine will be ready when the
On/Stand-by
On/Stand-by
button stops blinking and the
button stops blinking and the
supply button lights are ON steadily.
supply button lights are ON steadily.
Lift the pod loading lever until it locks into posi-
Lift the pod loading lever until it locks into posi-
tion to open the pod fitting compartment.
tion to open the pod fitting compartment.
Put a Lavazza Blue or Expert capsule into the
Put a Lavazza Blue or Expert capsule into the
capsule fitting compartment.
capsule fitting compartment.
Lower the pod loading lever to close the pod fit-
Lower the pod loading lever to close the pod fit-
ting compartment. Place the cup onto the plate.
ting compartment. Place the cup onto the plate.
Press down over 3 seconds the button of the
Press down over 3 seconds the button of the
icon you wish to program. The selected icon will
icon you wish to program. The selected icon will
flash quickly whereas the others buttons will turn
flash quickly whereas the others buttons will turn
off, except for the on-off button, to indicate that
off, except for the on-off button, to indicate that
the programming mode has been accessed.
the programming mode has been accessed.
Keep the supply button depressed.
Keep the supply button depressed.
Once the desired amount of coffee has been ob-
Once the desired amount of coffee has been ob-
tained, stop the supply by releasing the button.
tained, stop the supply by releasing the button.
The machine will stop and the dose will be pro-
The machine will stop and the dose will be pro-
grammed.
grammed.
Measures are always programmed using the same
Measures are always programmed using the same
button; any action by pressing other buttons will be
button; any action by pressing other buttons will be
ignored.
ignored.
The programmed amount of brewed coffee can be
The programmed amount of brewed coffee can be
changed by repeating the programming.
changed by repeating the programming.
If the programmed measure exceeds the maximum
If the programmed measure exceeds the maximum
one allowed, the machine will automatically stop
one allowed, the machine will automatically stop
delivery, the delivery button will blink and the last
delivery, the delivery button will blink and the last
programmed measure will be saved in the memory.
programmed measure will be saved in the memory.
If case of power failure during the programming
If case of power failure during the programming
phase, the last programmed value will remain stored
phase, the last programmed value will remain stored
in the memory.
in the memory.
If, during the dose programming, a missing water
If, during the dose programming, a missing water
condition is reported, the machine will stop supplying
condition is reported, the machine will stop supplying
and the dose being programmed will not be saved.
and the dose being programmed will not be saved.
Once the water tank has been filled, the dose pro-
Once the water tank has been filled, the dose pro-
gramming procedure shall be repeated.
gramming procedure shall be repeated.
EN
EN
button to switch the
button to switch the
d
13
13
Publicidad
