Publicidad
Idiomas disponibles
Idiomas disponibles
You can operate the appliance using the LED touch screen located on the front of the ap-
pliance.
Place the fan on a stable flat surface and plug it into a 220 - 240V~A.C. electrical outlet.
The LED screen will display the current room temperature.
•
Clock: In standby mode, press the power button for three seconds, the
will start flashing. Use the
to adjust the minutes from 0 to 59. When you have set the desired time, wait for five sec-
onds and then the clock will stop flashing.
Note: the clock can only be set in standby mode, it can't be set during operation.
•
ON Timer: In standby mode, press the
temperature display will change to "1". You can now use the same button to set the timer
between 1 and 24 hours. Once you have set the desired time, wait for five seconds, the
light will stop flashing and the room temperature will appear again.
Note: When the ON timer is set, the product will turn on automatically at the pre-set time, it
will run continuously for 6 hours and then it will automatically turn itself off. The user can
stop the ON timer function at any time.
•
Power: Turn the fan on by pressing the
button for three seconds.
•
Speed: Press the
change to "1". You can now use the
have already selected the speed, the
room temperature will appear again.
•
Mode: Press the
the mode "NA" (natural mode)/SL (sleep mode). Once you have chosen your preferred
mode, wait for five seconds, the
appear again. Long-press
•
OFF Timer: Press the
will change to "1". Press the
set the desired time, wait for five seconds, the
temperature will appear again.
•
Oscillation: Press the
ing. Press the
button again to turn off the oscillation feature.
•
LED light: To turn on the LED light, turn on the appliance and then press and hold the
button. To turn it off, press and hold again.
The LED display will stay lit for 30 seconds once you have adjusted all the settings, then it will
dim and go into standby mode. To turn it back on you can press the
OPERATING INSTRUCTIONS
button to adjust the hours from 1 to 24 and the
button, and then the
button to select the desired speed (1-12). Once you
button and then the
light will stop flashing and the room temperature will
button for three seconds to start the ION mode.
button, and then the
button and set the timer from 1 to 12 hours. Once you have
, button, then press the
button and it will start flashing, then the room
button. To turn the fan off, press and hold the
, button, the room temperature display will
light will flash for five more seconds and the
, button, the temperature display will show
, lbutton, the room temperature display
light will stop flashing and the room
button and the unit will start oscillat-
buttons
pbutton
button.
E NGLI SH
7
Publicidad
