To do so, please connect the vacuum hose to the device and the adapter to the vacuum
canister valve.
For an optimal vacuum, please make sure that all components are firmly attached to
the following points during the vacuuming process:
Hose connection on the vacuum generator, hose on the connection, connection on the
adapter, adapter on the valve on the container lid.
► When using a chamber vacuum packing device, canisters only require 5 seconds to
become sufficiently evacuated. Please abort the vacuum packing process early to
ensure your canister is not damaged. Please proceed with caution to prevent damage!
9.2 Vacuum packing using hand-operated pump
You can also vacuum the canisters with CASO hand-operated pump (art.
1178).Place hand-operated pump onto the middle of lid valve and pump
until you feel resistance (approx. 15-20 times for the small canister and
approx. 30-35 times for the large canister).
► Do not apply too much pressure on the canister lid while pumping, do
not lean on canister. Extrem pressure may damage the lid.
9.3 Vacuuming with VacuOne Touch
You can also vacuum the containers with our electric hand
vacuums (Art. 1169 & 1301).
Fill the canister and leave 0,5 cm free to the upper edge. Place
the lid on the canister.
Lightly press down the lid of the canister at the beginning of the
vacuum operation.
Place the device at the middle of the valve on the canister lid and
press it down slightly.
Press the ON/OFF button of the device and air will be withdrawn form the canister.
Please note
Please note
15