Huffy GREEN MACHINE Manual Del Propietário página 14

MAINTENANCE
Maintenance and Service
EN EN
WARNING:
AU AU
• As with all mechanical components, this product is subjected to wear and high stresses. Different
materials and components might react to wear or stress fatigue in different ways. If the design life of a
component has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of
crack, scratches, or change of coloring in highly stressed areas indicate that the life of the component has
been reached and should be replaced.
• Inspect the product frequently. Failure to inspect the product and to make repairs or adjustments, as
necessary, can result in injury to the rider or to others. Make sure all parts are correctly assembled and
adjusted as written in this manual and any "Special Instructions".
• Check the tightness of the fasteners before each use. Replace any fasteners that are damaged.
• Immediately replace any damaged, missing, or badly worn parts with original equipment.
• Avoid wearing loose clothing and items when riding or performing maintenance to reduce risk of
entrapment that could result in an injury.
• Frequently check tires and wheels for excess wear or damage. If equipped with pneumatic tires, regularly
check tire pressure and adjust as needed. Tire pressure is listed on side of tires.
• Check Brakes for proper function and condition. If model has hand brakes, check that brake lever provides
proper braking when squeezed and that brakes do nut rub.
• Keep the product clean and free of dirt, dust and water. This will prolong the useful life of the product.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do
not use automotive wax, abrasive cleaners or wash the vehicle with soap and water.
• High temperatures, intensive use, and impact damage may be invisible to the user and result in injury
to rider. If you suspect damage or excess wear to wheel rims, frame, fork, suspension joints (if any), or
composite components (if any), seek service from bike shop for repair.
• Make sure all fasteners are correctly tightened as written in this manual and any "Special Instructions".
Parts that are not tight enough can be lost or operate poorly. Over tightened parts can be damaged. Make
sure any replacement fasteners are the correct size and type.
• Self-locking nuts and other self-locking fasteners may lose their effectiveness when re-used.
• Store indoors when not in use. Keep it away from sources of heat, such as stoves and heaters.
• Store in a clean dry environment. Vehicle's left outside in weather can deteriorate very quickly. Prolonged
exposure to UV-rays, rain, and outdoor elements may damage the enclosure materials.
NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the correct tools
or if the instructions in this manual or any "Special Instructions" are not sufficient for you.
Radio Frequency Information (if applicable)
WARNING:
responsible for compliance could void the user's authority to operate the equipment.
This device or charger/adapter complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult
the dealer or an experienced radio/TV technician for help.
14
Changes or modifications to this unit not expressly approved by the party