Huffy GREEN MACHINE Manual Del Propietário página 9

Torque Table
Recommended Torque:
Use of a torque wrench is recommended. Recommended torque for each fastener is listed below. In addition
to tightening to the recommended torque, please ensure the parts of the product are suffi ciently tightened
by performing the functional tests (in the component assembly sections of the owner's manual) on each
component as it is tightened.
NOTE: Please check that all fasteners on the product are torqued according to the table below:
Recommended Torque for clean, dry threads:
Fastener Size
M4 mm (.157 in)
M5 mm (.196 in)
M6 mm (.236 in)
M7 mm (.275 in)
M8 mm (.314 in)
M10 mm (.393 in)
Owner's Model Identifi cation Record
NOTE: This information is only available with model itself. It is not available from Huff y.
Model number is on the packaging and instruction manual.
Write the model number below to keep it for future reference.
If the model is stolen, give this number and a description of the model to the police. This will help them fi nd
the model.
Model Number:
Purchase Date:
Model Name:
Torque (N•m / ft-lb)
2.8 N•m (24.78 in-lb)
5.5 N•m (48.67 in-lb)
9.5 N•m (84.08 in-lb)
16.3 N•m (12 ft-lbs)
23 N•m (17 ft-lbs)
44.7 N•m (33 ft-lbs)
Tools Recommended
Torque Wrench
INTRODUCTION
How to Measure:
Screw or bolt size is determined by the
width at the THREADS as shown.
EN EN
AU AU
9