Descargar Imprimir esta página

Kärcher SC 3 Upright EasyFix Manual De Instrucciones página 19

Ocultar thumbs Ver también para SC 3 Upright EasyFix:

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Start cleaning the carpet.
Removing the carpet glider from the
floor nozzle
CAUTION
Beware of burns to your feet
The carpet glider can heat up during
the steaming process.
Do not operate or remove the carpet
glider bare-footed or using open san-
dals.
Only operate or remove the carpet glid-
er using suitable footwear.
1. Press the strap on the carpet glider
downwards using your toecap.
2. Lift the floor nozzle upwards.
2.
1.
2.
1.
Care and service
Draining the water reservoir
ATTENTION
Device damage due to water putre-
faction
If the device is not put into operation for
more than 2 months, the water in the
tank may putrefy.
Drain the water reservoir before breaks
in operation.
1. Press the OFF switch.
The device is switched off.
2. Unplug the device from the outlet.
3. Remove the reservoir cover.
4. Drain the water reservoir.
The cartridge can remain in the wa-
ter reservoir.
3.
1.
2.
Replacing the decalcification
ATTENTION
Device damage and shortened ser-
vice life
If the replacement intervals (indicator
light) for the decalcification cartridge
are not observed, there is a risk of de-
vice damage and the service life of the
device may be shortened.
Observe the replacement intervals (in-
dicator light).
English
4.
cartridge
19

Publicidad

loading