Descargar Imprimir esta página

Hisense AVWT-72FHFSHA Instrucciones De Montaje página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

(2)
Do not install the unit over the walkways. Condensate may fall on people.
(2)
In case of installing the unit in such a place, provide the additional drain pan.
(3)
When drain piping is necessary for the outdoor unit, use the drain boss set (Optional, DC-01Q).
(3)
Do not use drain boss and drain pan kit in the cold area. The drain water in the drain pipe may be frozen
and then crack the drain pipe.
(4)
When installing the unit on a roof or a veranda, drain water sometimes turns to ice on a cold morning.
(4)
Therefore, avoid draining into an area where people often use because it is slippery.
4-9/64(105)
4-9/64(105) 5-45/64(145)
Model: 72~96
Model: 120
1-49/64(45)
25-63/64(660)
7-9/16(192)
3-15/16
(100)
Connection of Refrigerant pipeline
(8-21/32(220)×4-23/32(120) square hole)
Model: 144~168
30-45/64(780)
Drain port (Φ1-1/32(26)×5)
Drain pipe connector
(optional)
Connection of Refrigerant pipeline
10-7/16(265)
(9-21/64(237)×5-3/64(128) square
hole)
9
unit: in.(mm)
Connection of communication cable
(Ø55/64(22)×2 via hole)
unit: in.(mm)
Drain port (Φ1-1/32(26)x 2)
Drain pipe connector (optional)
4-1/16(103)
7-3/4(197)
Drain port (Φ1-1/32(26)×2)
Drain pipe connector (optional)
Connection of power cable
(Φ1-23/32(43.7) via hole)
Connection of communication cable
(Ø55/64(22)×2 via hole)
unit: in.(mm)
8-11/32(212)
Connection of power cable
(Φ1-23/32(43.7) via hole)
Connection of communication cable
(Ø55/64(22)×2 via hole)

Publicidad

loading