INSTALLATION: WALL MOUNT
1. Choose a solid wall. Position the mounting bracket
(C) where the electric firebox (A) is to be installed
on the wall, and ensure that the mounting bracket
(C) is level.
Use a pen to mark the 4 mounting holes on the
wall at the desired mounting location, using the
mounting bracket (C) as a template.
2. Insert the 4 self-drilling wall anchors (CC) into
the wall where previously marked. If installing the
mounting bracket (C) to a wall stud, there is no
need to drill the holes in the wood and no need for
the plastic wall anchors (CC). It is recommended
to install the mounting bracket to at least one stud.
3. Secure the mounting bracket (C) to the wall using
4 large screws (BB).
1
2
3
9
C
CC
C
BB