cecotec Cumbia POWER MATIC-CCINO Vaporissima Manual De Instrucciones página 24

ENGLISH
9. Place the coffee-residue tank in the interior drip tray and put them back in their original
position. Fig. 12
Note: If is flashing, the coffee-residue tank is not installed
10. Place the exterior drip tray back to its original position. Fig. 13
11. Release the steam-nozzle cover by turning it to the left. Then, pull it down to remove it.
Fig. 14
12. Pull the metallic tube downwards to remove the nozzle cover and the metallic tube. Fig. 15
13. Clean both the nozzle cover and the metallic tube under running hot water and use the
included needle to clean the orifice. Fig. 16
14. Install the metallic tube back into the steam nozzle cover. Then, push the nozzle cover
upwards and turn it to the right to lock it in place. Fig. 17
Descaling
When remains steady, it indicates that the appliance is due for descaling. The appliance
will be kept in optimum condition if you perform this function when the machine indicates it
or more frequently depending on the hardness of the water used. To do so, follow the below
steps:
1. Fully fill up the water tank.
2. Add the provided sachet of cleaning product into the water tank.
IMPORTANT: Do not use vinegar or other non-specific cleaning products to perform self-
cleaning on the appliance. Use only cleaning products specific for coffee machines. The use of
another cleaning product could damage the appliance.
3. Place a large empty container under the coffee spout.
4. In Standby mode, press and hold the On/Off button (29) and the strong-coffee button
(18) for 5 seconds. The machine will beep, and both
will flash.
5. Press the strong-coffee button (18) to confirm the start of the descaling process. To
cancel the descaling process and return to Standby mode, press the On/Off button (29).
Please note
If you cancel the descaling process, the icon
6. will flash to indicate that descaling is in progress.
Caution: keep skin and other body parts away from hot water.
7. When all the water in the tank is dispensed,
Remove any remaining cleaning solution from the water tank, rinse it, and refill it with
clean water up to the Max mark. Empty the collecting container and place it back under
the coffee spout. When the water tank is reinstalled,
then carry out a rinsing process, dispensing half a tank of water first and then waiting for
about a minute before dispensing the rest of the water in the tank.
8. When the rinsing process is finished, the machine switches off automatically.
POWER MATIC-CCINO VAPORISSIMA
46
and the strong-coffee button
will not disappear.
and the strong-coffee button (18) will flash.
will turn off. The appliance will
Please note
To ensure that the descaling process is complete, be patient during the process and make sure
the appliance has switched off automatically.
System-emptying function
It is recommended to use the system-emptying function before a long period of inactivity, to
protect the appliance against frost and before repairing the device.
1. In Standby mode, press and hold the On/Off button (29) and the mild-coffee button (19)
for 5 seconds.
2. will start flashing.
3. Remove the water tank from the device.
emptying function is being carried out. You can press the On/Off button before removing
the water tank to cancel the process and return to Standby mode.
4. When the system-emptying function is completed, the appliance will automatically
switch off.
Important
After performing the system-emptying function, when using the machine again, press the
hot-water button until the machine dispenses water before using any of the functions.
Manual rinsing
You can perform a manual rinse cycle to clean both the steam nozzle and the coffee spout
after use. A manual rinsing is also recommended if the appliance has not been used for a long
period of time.
1. Place an empty container under the steam nozzle and coffee spout.
2. In Standby mode, press and hold the On/Off button (29) and the hot-water button
(22).
3. The machine will beep twice, and the hot-water button will flash. Both the steam
nozzle and the coffee spout will then dispense a small amount of water used for
rinsing.
Danger: the water dispensed is hot. Avoid contact with water or splashing.
4. After rinsing, the machine will return to Standby mode.
Cleaning of the appliance
1. Unplug the cord from the power supply.
2. Discard the drip-tray water.
3. Use a damp cloth or a non-abrasive cleaning agent to clean water stains from the
appliance.
IMPORTANT: do not use any abrasive cleaning agents, descaling agents, or vinegar to clean
the appliance.
ENGLISH
will light up steady to indicate that the system-
POWER MATIC-CCINO VAPORISSIMA
47