Uline H-4404 Manual De Instrucciones página 2

Power Switch
POWER SWITCH
Press to turn power ON or OFF.
TAPE LENGTH DISPLAY
Tape Length
123
The last digit indicates millimeters and
the first two digits centimeters.
LENGTH ADJUSTMENT KEYS
cm mm
Press MM key to set tape length in mm.
Press CM key to set tape length in CM.
ADVANCE/CUT KEY
Auto
Feeds tape to the preset length and
cuts automatically.
PAGE 2 OF 15
PARTS AND FUNCTIONS
Pressure Knob
Fuse
Feed
Roller
Sensor Plug
CONTROLS
20
S
Reel
Tape Length Display
Length Adjustment Keys
Reset Key
Reverse Key
Cut Key
Advance Key
Advance/Cut Key
Sensor Switch
Separating
Roller
REVERSE KEY
Feed Roller reverses. Use this key to
change tape.
RESET KEY
Length display is reset to 20mm. This
key can be used as an
emergency stop.
ADVANCE KEYS
Press MM key to set tape length in mm.
Press CM key to set tape length in CM.
CUT KEY
Feeds tape to the preset length and
cuts automatically.
PRESSURE KNOB
Adjusts top roller to change
H
pressure on tape.
0922 IH-4404