Tabla de contenido
Publicidad
Tools Required / Outiles Utiles /
Herramientas Útiles
2
3⅛"
1"
2⅛"
8 mm
2 mm
6 mm
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• To prevent scald injury, the maximum output tem-
perature of the shower valve should be no higher
than 120°F. In Massachusetts, the maximum
output temperature of the shower valve can be no
higher than 112°F.
• Protection against backflow is provided by a
double check valve.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*
2.5 gpm max.
Publicidad
Tabla de contenido
