Descargar Imprimir esta página

Technical Information; Installation Considerations - Hansgrohe Axor Citterio M 341161 Serie Instrucciones De Montaje / Manejo / Garantía

Publicidad

Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm

17 mm
30 mm
24 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This faucet requires rough 136181 (not
included). The rough must be installed and the
finished wall completed and made watertight
before installation of the trim kit.
This trim is not compatible with
old-style rough 34111181.
If rough 34111181 is already installed,
please contact Hansgrohe Technical
Service regarding the additional parts
and special instructions necessary to
install this trim kit.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
10° - 140° F*
176°F*
1.5 gpm

Publicidad

loading