Makita EN424MP Manual De Instrucciones página 7

Installing or removing the shear
blades
CAUTION:
When replacing the shear blades,
always wear gloves so that your hands do not
directly contact the blades.
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
NOTICE:
When replacing the shear blades, do
not wipe off grease from the crank.
1. Place the shear blades on the blade cover.
1
Fig.13
► 1 . Blade cover
2.
Turn the shaft so that the upper blade and lower
blade are positioned alternately.
Fig.14
► 1 . Shaft
3. Close the blade cover, and then place the attach-
ment upside down.
4. Remove 4 bolts with the hex wrench and remove
the cover.
1
2
Fig.15
► 1 . Bolt 2. Cover
5. Remove the shear blades.
1
Fig.16
7 ENGLISH