Freestyle GILGO Manual De Instrucciones página 2

4. Press the S3 button. The hour
digits will blink.
5. Use the S1 button to set the
hours.
6. Press the S2 button to exit. To
activate the alarm, press the
S1 button while the desired
alarm is displayed. The ALARM
1 ON or ALARM 2 ON indicator
will light up. Press the button
a second time to deactivate the
function. When alarm goes off
there will be a beeping sound
and the backlight will flash.
To stop the alarm, press any
button.
9. HOW TO USE THE
CHRONOGRAPH
To start or stop:
1. Select the CHRONO mode
using the S3 button. The last
recorded lap and lap time will
be displayed above the total
accumulated time.
2. Press the S2 button to clear
the chronograph.
3. Press the S1 button to start.
The RUN indicator will light
up and both counters on the
display will run simultaneously.
4. Press the S1 button to stop.
The STOP indicator will light
up. The chronograph counts
from 0 hour, 0 minute and
00.00 second to 9 hours, 59
minutes and 59.99 seconds
and back.
To keep track of individual lap
time and total accumulated time:
1. Clear the chronograph first by
pressing the S2 button.
2. Press the S1 button to start.
3. Press the S2 button whenever
you want to register a lap.
The current lap number and
lap time will be frozen above
the accumulated time for
eight seconds before running
again automatically. While the
chronograph is running in the
background, the LAP and
SPLIT indicators will appear
and the RUN indicator will
flash.
When the chronograph starts
running in the foreground
again, the lap time will start
from 8"00 seconds while the
total accumulated time will
register the total time elapsed.
4. Repeat the last step until all
laps are finished. If you have
more than 10 laps, the lap
number will show a flashing
"F" and the extra laps will not
be stored.
5. Press the S1 button to finish.
6. Press the S2 button to clear.
If there are laps previously
recorded, you can change the
lap number while recording new
ones. To do so,
1. Press the S2 button when the
chronograph is running in the
background.
2. Keep pressing the button until
you locate the lap you want
and the chronograph will start
recording from there.
10. HOW TO USE THE RECALL
MODE.
After storing laps, pressing the S3
button after the CHRONO mode
will bring you to the RECALL
mode. The RECALL indicator will
light up.
To recall the individual lap time
and total accumulated time,
press the S1 button to scan from
one lap to another. Note that
only the last cycle of laps will be
stored.
11. HOW TO USE THE PACER
Select the PACER mode using the
S3 button. The PACER indicator
will light up. The pacer frequency
will be displayed above the
normal time. Use the S2 button to
select the frequency or number
of beeps the pacer will emit in a
minute. You can select from 40
to 160 in 19 settings. To start a
pacer, press the S1 button. To
stop it, press the S1 button again.
12. HOW TO USE THE TIMER
To set the count down timer:
1. Select the TIMER mode using
the S3 button. The timer will
be displayed above the normal
time.
2. Press and hold the S2 but-
ton. The timer will recall the
last countdown time and the
second digits will blink.
3. Use the S1 button to set the
seconds.
4. Press the S3 button. The min-
ute digits will blink.
5. Use the S1 button to set the
minutes.
6. Press the S3 button. The hour
digits will blink.
7. Use the S1 button to set the
hours.
8. Press the S2 button to confirm.
You can set the timer from 0
hour, 00 minute and 00 second
to 9 hours, 59 minutes and 59
seconds. To start a countdown,
press the S1 button. Press the
button again to stop.
When the timer reaches zero in a
countdown, it will automatically
count up. Warning beeps and
backlight flashes will be emit-
ted. To mute the beeps and stop
the flash,
press any button. Press the S1
button to stop the counting all
together.
To repeat the countdown time,
press the S2 button when the
timer has stopped counting.
13. LOWBATTERY-WARNING
INDICATOR
A low battery-warning indicator
is activated when the battery is
nearly empty. When this occurs
we recommend replacement of
the battery.
To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.
ENGLISH