Braun 3109-BT Folleto De Instrucciones página 10

LED Control Panel
a. start
Use to start the brew cycle.
b. timer
Use to program the start time of the brew cycle.
The Timer can be set for any time, day or night.
c. calc
Use to activate the descaling mode and set the
water hardness level.
d. clock
Displays time of day and use to set time for the
timer.
e. set
Use to program the time of day, timer and water
hardness level.
f. strong
Use to select the brew strength (regular or
strong).
g. 1-4
Use to brew smaller amounts of coffee (up to
4 cups).
Operating Instructions
Switching On/Off
• To switch on the coffee maker, press the On/Off
button (1). The green indicator light will illuminate
indicating that the coffee maker is in «ready»
mode.
• To switch off the coffee maker, press the On/Off
button again. The green indicator light will turn off
indicating that the coffee maker is in «stand by»
mode.
Auto Off Function
For your convenience and also additional safety, the
appliance will switch off automatically 1 minute after
the brewing cycle is complete.
Programming the Coffee Maker
Before programming, always switch on the
coffee maker.
Note: The device features a 60-second power loss
back-up system that remembers all programmed
information, including time of day and the timer in
the event of a tripped breaker, unit is unplugged, or
power failure.
Setting the Time
When the coffee maker is first plugged in or when
power is restored after an interruption, the LED
control panel will start flashing 02:00.
10
• To set the time, press the CLOCK button (d) for a
minimum of 3 seconds. The LED control panel will
start flashing (24h).
• Press the SET button to select the time format
(24h or 12h). To save the time format and to set
the hours, press the CLOCK button. The hours will
start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired hour is displayed.
• To set the minutes, press the CLOCK button. The
LED control panel will start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired minute is displayed.
• Press the CLOCK button again to save the desired
time.
• If during the setting process, no button is pressed
for 10 seconds the time currently set will be
saved.
Programming and Activating the Timer
• Press the TIMER button (b) for a minimum of 3
seconds.
• The hours in the LED panel will start flashing.
• To set the hours, press and hold the SET button
(e) to scroll through numbers. Release the button
once the desired hour is displayed.
• To set the minutes, press the TIMER button. The
LED control panel will start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired minute is displayed.
• Press the TIMER button again to save the desired
time.
• The pre-set time will disappear after 3 seconds
and the time of day will show on the LED control
panel.
• If during the setting process, no button is pressed
for 10 seconds, the time currently set will be
saved.
This function can only be activated if the timer and
the time of the day have been set.
To activate the timer function:
• Press the TIMER button (b). The green LED above
the button will illuminate and the coffee maker will
start to brew at the pre-set time.
• The pre-set time disappears after 3 seconds.
• When the appliance starts brewing, the green LED
START will continually flash and the LED TIMER
turns off.
• Press the TIMER button (b) again to switch off the
function: the green LED light will disappear.
NOTE: The timer function remains activated even
when the appliance has been switched off (1).