De-Energized - Amprobe AT-7000 Manual De Usuario

2. KIT COMPONENTS
Main applications
Help guide
Setting menu
Buzzer volume adjustment
Home menu
Language
Backlight
Setting
Help Guidance
Sensitivity*
Smart Sensor Range
Breaker Voltage
*Note: The Auto and Manual sensitivity mode can be easily changed by pressing the + and
– key at the same time when the receiver is in a tracing mode. When sensitivity mode is set
to "Auto" manual adjustment is disabled.
ENERGIZED:

DE-ENERGIZED:

Figure 1a: Overview of all elements on home screen
Figure 1b: Overview of all elements on the setting menu
English, French, German, Spanish, Italian
25%, 50%, 75%, 100%
DEFAULT : Restore default settings
ON
: Device will guide you through each mode
OFF : Device will start without guidance
MAN : Manual sensitivity adjustment (+) and (-) keys
AUTO : Auto sensitivity adjustment
SHORT : For wire detection up to 3 feet
LONG : For wire detection between 3 and 20 feet
110V : For 110V to 120V systems
220V : For 220V to 240V systems
- -
Sensitivity adjustment
7