Publicidad
Idiomas disponibles
Idiomas disponibles
Before use
Detaching control panel
You can detach the control panel when leaving
the car. When detaching or attaching the con-
trol panel, be careful not to damage the con-
nector on the back of the control panel and on
the panel holder.
1
Press
(Release) to open the control
panel.
2
Push the control panel to right.
3
Pull the control panel.
4
Put the detached control panel into the
protective case.
Notes
! The control panel is a precision piece of equip-
ment and can be damaged by shocks or jolts.
For that reason, keep the control panel in its
protective case while detached.
! Do not touch the connectors directly with your
fingers or with any metal device.
Attaching control panel
1
Align the left side of the panel with
stopper.
2
Push the right side or panel into the
unit until it clicks.
Notes
! When detaching or attaching the control
panel, do not press the display or control but-
tons.
! The control buttons may not work properly if
the control panel is not attached properly. If
this occurs, gently press the control panel.
! Do not leave the control panel in any area ex-
posed to high temperatures or direct sunlight.
! Do not drop the control panel or subject it to
strong impact.
! Do not allow volatile agents such as benzene,
thinner, or insecticides to come into contact
with the surface of the control panel.
! Do not try to disassemble the control panel.
2
1
En
Section
04
15
Publicidad
