Publicidad
Idiomas disponibles
Idiomas disponibles
Please pay attention when adding water to:
Unplug the appliance
Before refilling, remove any remaining water
Use only clean water
Fill the water tank slowly
Pay attention to the front water level display window to not exceed the maximum level.
Lock the tank with the slider pin, to prevent the tank falling
Before connecting the power supply, please read the safety precautions and make sure that
the power socket voltage conforms to the requirements of the air-cooler unit.
After turning on the power, the air-cooler will sound Bi Bi twice, then enter Standby mode. At
this time other keys are invalid except the Power on/speed key (Power on sound: BiBi, Key
Sound: Bi, Switch off sound: Bi)
1. On-off Key: On pressing this key, issuing a Bi sound, circuits enter normal working state,
power indicator switches on; Medium fan speed shifts to low fan speed after 3 seconds; in
working state, pressing this button will make a Bi sound, then it will go to standby status.
2. Speed Key: press this key in working state, making a Bi-sound, to set up the fan speed.
The fan speed follows the order: low—mid—high—Low—mid......, the indicator lights up
accordingly. The product turns on at medium speed by default, but will shift to low fan speed
after 3 seconds.
3. Swing Key: under the boot-up state, press this key to switch oscillation on, the indicator
switches on; press the key again, the indicator switches off, and so on.
4. Cooling Key: under the boot-up state, to switch the cooling function on, relevant indicator
switches on, other water tank indicator switches on as well; press the button again, the cooling
function and relative indicator will turn off, and so on.
4.1. When the Cooling function turns on, the water pump will work for 45 seconds before te-
sting the water level; if the water level remains below the set level for 5 seconds, the cooling
function will turn off automatically, and the BiBi sound will last for 5 seconds.
5. Timer Key: In the initial state, press this key to open the timer function, setting mo-
del:1-2-4-0-1-2......and so on, LED indicates a corresponding time.
NOTE
- At first use, the appliance may have a slight odor
- At each re-starting, the appliance may have water condensate on the grid
14
OPERATING INSTRUCTIONS
Publicidad
