EDM Product 08760 Manual De Instrucciones página 24

Cordless angle grinder
Safety Warnings
Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
Do not use the charger if it has been subjected to a heavy
knock, dropped or otherwise damaged in any way. Take the
charger to an authorized service centre for a check or repair.
Do not disassemble the charger. Take it to an authorized
service centre when service or repair is required. Incorrect
re-assembly may result in the risk of fire, electric shock or
electrocution.
To reduce the risk of an electric shock, unplug the charger
from the power supply before attempting to clean it.
Removing the battery pack alone does not reduce the risk.
The charger is designed for use from a standard household
electrical supply. Do not attempt to connect the charger to
a supply with a different voltage.
The charger is not intended for use by persons (including
EN INSTRUCTION MANUAL
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the charger by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the charger. Do not expose charger to rain or
snow.
Do not mount charger on wall or permanently affix charger
to any surface. The charger is intended to use
on a flat, stable surface(i.e. table top, bench top) Never
attempt to connect two chargers together.
Never insert any objects into the charger's air vents. Electric
shock or damage to the battery charger may result.
Disconnect the charger from the outlet before attempting
any cleaning. This will reduce the risk of electric shock.
Removing the battery pack will not reduce this risk.
Never recharger a fully charged battery cartridge. Do not
charge non-rechargeable batteries.
REF. 08760