Grundig GDKP5460B Manual Del Usuario página 9

3 Operation of the appliance
3.1 Controlling the appliance
A B
Key
A : 1. stage button
B : 2. stage button
C : 3rd stage button
D : Light On/Off
3.2 Energy efficient usage
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operating the hood
• Your appliance contains a motor that has various
speeds.
Cooker Hood / User Manual
C D
Function
Operates the appliance on
1st speed. When you press
this button again to turn off
the appliance, the screen
speed stage turns off.
Operates the appliance on
2nd speed. When you press
this button again to turn off
the appliance, the screen
speed stage turns off.
Operates the appliance on
3rd speed. When you press
this button again to turn off
the appliance, the screen
speed stage turns off.
You may illuminate the cook-
ing area by pressing this
button. Re-press the button
to turn off the lamp.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (A, B, C).
• You may illuminate the cooking area by pressing
the lamp (D).
3.4 Automatic stop
Your appliance has Automatic Stop feature, ena-
bling it to ventilate for a bit more and remove the
unwanted odours and vapour inside the environ-
ment and turn off automatically after the cooking
is done. To enable Automatic Stop feature, press
the any speed stage button (A, B, C) on the control
panel for longer than 2 seconds; the 15-minute
timer function shall be activated. When the au-
tomatic stop feature is active, pressing the same
speed button shall disable the automatic stop
function and the appliance's motor shall stop. This
feature is disables when you switch between dif-
ferent speed stages. If you want the appliance to
stop automatically, you need to enable the auto-
matic stop feature again.
3.5 Replacement of lamp
MAX 3 W
(Figure 3)
9 / EN