Uline H-10612 Manual De Instrucciones página 2

3. Attach bottom upright to top upright at desired height
using two short bolts, two washers and two nuts.
Repeat for remaining three bottom uprights.
(See Figure 2)
IMPORTANT! Ensure all uprights are set to same
height. See upright height guide on page 3.
4. Align bottom frame with holes in bottom uprights.
(See Figure 3)
NOTE: U-channel on bottom frame
should face toward bottom uprights.
5. Align holes in caster with bottom frame and bottom
upright holes. Attach using four short bolts and
washers. Repeat for remaining three casters.
(See Figure 4)
IMPORTANT! Install rigid casters on same
end of table facing 42" side. (See Figure 4)
NOTE: Insert bolt from casters through
bottom frame and into bottom uprights.
6. With second person, lower assembled pallet stand
onto casters.
PAGE 2 OF 9
ASSEMBLY CONTINUED
Figure 2
Figure 3
Figure 4
42" Side of Table
Bottom
Frame
0523 IH-10612