Toto TES201AB Serie Manual De Instalación Y Del Propietario página 12

INSTALLATION PROCEDURE - Connecting Hoses and Cords
Connector Connections
Remove the cover of the controller and
connect the sensor connector to the float
switch connector.
Connect the sensor connector and the hose
in the prescribed positions.
For single installation
Connect in one place.
Connector (white) for sensor only
For double installation
Connect in two places.
Connectors (white) and
For triple installation
Connect in three places.
Connectors (white),
for sensor
Caution
All connectors of the sensors connected to the
spout are white.
The colors of the connectors arranged in the
controller are white, yellow and blue.
Different colors may be connected.
Wiring Image
Bundling of Float Switch Cord
Using bundling clamps, stow and bundle the cords.
(yellow) for sensor
(yellow) and (blue)
Tank
Bundling clamp
Connect the hoses
and the sensors in
predetermined
pairs.
Socket (Sensors)
Connector (Sensors, white)
Side face (View of wiring)
12
(Continued)
White Yellow Blue
Float switch