Toto TES201AB Serie Manual De Instalación Y Del Propietario página 26

PERIODIC MAINTENANCE - Nozzle
6. Remove the filter from the hot water, and
clean it with a soft brush.
Rinse the filter and dry it with a soft cloth.
7. Remove the nozzle from hot water. Use a
bent paper clip to remove any soap
clogging the 4 small holes at the soap inlet.
8. Attach the filter onto the nozzle when cleaning
is complete. Use the Phillips head screwdriver
to secure the nozzle back onto the spout with
the screw.
Note
Activate the dispense to make sure no
leaking occurs.
(Continued)
Toothbrush
4 small holes
How to attach the nozzle
Caution
Always attach the nozzle with the
dispensing outlet facing downwards.
Otherwise the soap may spill everywhere.
Insert the nozzle
until its end
touches the main
body of the spout.
26
Filter
Bent paper clip